LDLC BM2-NVME Guide D'utilisation page 21

Connect a USB cable to the
5 case. Now the device is
ready for using.
CONNECTING TO PC
1. Turn on your PC / Laptop.
2. Plug the USB 3.1 type connector to the drive.
3. Connect another end of the USB cable to an available USB port on your PC / Laptop.
4. After connecting the device to a computer, detection and automatic installation of drivers
from the system will be performed.
DECONNECTING THE DEVICE
Windows
1. PC users: right click on the "Safely Remove Hardware" icon located in the System
Tray, which is in the lower right corner of your Windows desktop taskbar.
2. In the list that is displayed, select "Eject Hardware"
3. It will give you a message when it is safe to remove the device.
Note: Disconnecting the device before receiving this notification, can lead to loss or
data damages. When the message "Safe to Remove Hardware" appears, you can
unplug the drive from the USB port.
MAC
To safely disconnect the plugged drive from the host machine, close all the windows
listing the content of the removable disk. Once all the windows are closed, click on the
USB Storage icon, which is located on the Desk, and drag the volume icon to the Trash.
Wait 5 seconds before unplugging the drive.