LDLC BM2-NVME Guide D'utilisation page 19

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

PRECAUTIONS
Unscrewed or unfastened component may fall or slip off.
Do not let your device get
Do not leave it in a damp or high humidity environment or under direct sunlight.
Do not place your device near strong magnetic fields, such as television or radios.
This could damage the storage data.
Do not place the device on an unstable surface where it might drop.
ATTENTION !
New drives must be formatted before use.
Formatting will erase ALL data on storage device. Please make sure back up
all data before performing formatting steps.
Refer to your operating system's documentation for more information on
reformatting and partitioning your storage device.
INSTALLATION GUIDE
WARNING! Hard drives and storage enclosures require careful handling, especially
when being transported. If you are not careful with your hard disk, lost data may result.
Always handle your hard drive and storage device with caution. Be sure that you are
properly grounded by wearing an anti-static strap when handling computer
components or discharge yourself of any static electricity build-up by touching a large
grounded metal surface (such as the computer case) for several seconds.
Use the following instructions to install your drive :
wet.

Publicité

Chapitres

Table des Matières
loading

Table des Matières