Televes Free To Air Manuel D'utilisation page 36

User manual
7. - UHF Standard:
- This allows the selection of the desired UHF norm: PAL G, PAL I, PAL
K, and NTSC M.
8. - UHF Channel
- This allows the selection of the desired RF output channel, PAL (21 to
69) and NTSC (14 to 83).
9. - Sort Channel by LCN:
- This option lets the user enable or disable the automatic ordering of
channels as defined by the operator.
10. - VHF: 7 or 8 MHz
This option lets the user select the appropriate bandwidth (7 or 8 MHz)
for the reception of VHF signals.
36
"DTR-7122"