Hama 00178222 Mode D'emploi page 4

Note
• Before mounting the holder, check the installation options in your vehicle. If in
doubt, consult the manual for your vehicle or contact the manufacturer
• Never apply force when using the product or during installation.
3.1 Attaching the holder (A)
• Carefully push the ventilation grille clamp onto the open panels of the ventilation
grille until it locks into place
Note
Before setting a device in the holder, check that the panels are sturdy enough to
bear the weight. We recommend against using this model for terminal devices
heavier than 300 g.
• To remove the holder, carefully pull it out of the ventilation grille.
3.2 Inserting and removing terminal devices (B)
Note
Always take your terminal device out of the holder before attaching or removing the
bracket (ventilation grille clamp or other).
• Pull the holding brackets a little apart to insert/remove your terminal device.
4. Warranty Disclaimer
Hama GmbH & Co. KG assumes no liability and provides no warranty for damage
resulting from improper installation/mounting, improper use of the product or from
failure to observe the operating instructions and/or safety notes.
5. Service and Support
Please contact Hama Product Consulting if you have any questions about this product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
www.hama.com
3