Electrical Wiring - Uberhaus 68125101 Guide De L'utilisateur

INSTALLATION INSTRUCTIONS
Wall Mounting
1) Drill the required holes in the wall using the positioning screw holes.
2) Attach the bracket to the wall with the screws. (Fig.2)
3) Mount the heater to the bracket and engage the corresponding slots on the rear of
the heater. (Fig.3)
Fig .2
Removing the heater from the bracket
1) Press and loosen all clips.
2) Pull the heater to disengage the clips from the bracket.
This heater must be controlled by a thermostat. Please refer to thermostat installation
instructions for connection.
• The heater must be installed by a certified electrician
and in accordance with the local and national
building codes.
• This convection heater is to be used on a 240 V AC
power supply and grounded outlets.

ELECTRICAL WIRING

4
.3
Fig
L1
GROUNDING
L2