DURAVIT C11010 001U Notice De Montage Et D'utilisation page 8

9
CAUTION
Cut and crush injuries
> Wear gloves during installation.
> Use two wrenches, as shown, to connect the
hoses to the stops.
11
> From the underside of the sink, thread the
drain body into the waste seat.
> Drain assembly should only be hand
tightened. Duravit recommends the use of
silicone or acid free putty.
8
MAL_57159/20.10.3
8 Nm
5.9 ft-lbs
19 mm
10
> Place the waste seat in opening of the sink.
12
> Slide the pull rod onto lift rod.
> Tighten the bolt with a flat head
screwdriver.