Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
IMPORTANT SAFETY INSTRUCTIONS .................................. 2
SAFETY gUIdELINES - dEFINITIONS ................................... 2
gENERAL SAFETY RULES ..................................................... 3
FUNCTIONAL dESCRIPTION ................................................. 5
POWER CONNECTIONS ......................................................... 4
MOTOR SPECIFICATIONS ...................................................... 4
gROUNdINg INSTRUCTIONS ................................................ 4
EXTENSION CORdS ................................................................ 5
CARTON CONTENTS ............................................................... 5
IMPORTANT SAFETY INSTRUCTIONS
READ AND UNDERSTAND ALL WARNINGS AND OPERATING INSTRUCTIONS BEFORE
USING THIS EQUIPMENT. Failure to follow all instructions listed below, may result in
electric shock, fire, and/or serious personal injury or property damage.
Woodworking can be dangerous if safe and proper operating procedures are not followed. As with all machinery,
there are certain hazards involved with the operation of the product. Using the machine with respect and caution
will considerably lessen the possibility of personal injury. However, if normal safety precautions are overlooked or
ignored, personal injury to the operator may result. Safety equipment such as guards, push sticks, hold-downs,
featherboards, goggles, dust masks and hearing protection can reduce your potential for injury. But even the best
guard won't make up for poor judgment, carelessness or inattention. Always use common sense and exercise
caution in the workshop. If a procedure feels dangerous, don't try it. Figure out an alternative procedure that feels
safer. REMEMBER: Your personal safety is your responsibility. For additional information please visit our website
www.deltaMachinery.com.
This machine was designed for certain applications only. DELTA
strongly recommends that this machine not be modified and/or used for any application other than
that for which it was designed. If you have any questions relative to a particular application, DO NOT use the
machine until you have first contacted DELTA
If you have any questions relative to its application DO NOT use the product until you have written DELTA
Equipment Corporation and we have advised you. Contact us online at www.DeltaMachinery.com or by mail at
Technical Service Manager, DELTA
Information regarding the safe and proper operation of this tool is available from the following sources:
• Power Tool Institute, 1300 Sumner Avenue, Cleveland, OH 44115-2851or online at www.powertoolinstitute.com
• National Safety Council, 1121 Spring Lake Drive, Itasca, IL 60143-3201
• American National Standards Institute, 25 West 43rd Street, 4 floor, New York, NY 10036 www.ansi.org - ANSI 01.1
Safety Requirements for Woodworking Machines
• U.S. Department of Labor regulations www.osha.gov
SAFETY gUIdELINES - dEFINITIONS
This manual contains information that is important for you to know and understand. This information relates to
protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you recognize this information, we
use the symbols below. Please read the manual and pay attention to these sections.
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious
injury.
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious
injury.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate
injury.
Used without the safety alert symbol indicates potentially hazardous situation which, if not avoided,
may result in property damage.
TABLE OF CONTENTS
®
to determine if it can or should be performed on the product.
Power Equipment Corporation, 4825 Highway 45 North, Jackson, TN 38305.
®
UNPACkINg ANd CLEANINg ................................................ 6
INSTALLATION OPTIONS ........................................................ 6
OPERATION .............................................................................. 8
TROUBLESHOOTINg .............................................................. 8
MAINTENANCE ........................................................................ 9
ACCESSORIES ........................................................................ 10
WARRANTY ............................................................................. 10
FRANÇAIS ................................................................................ 12
ESPAÑOL ................................................................................. 22
®
2
Power Equipment Corporation
®
Power
Publicité
Table des Matières
