Thermador T24UR925DS Guide D'installation page 17

2. Remove the gasket from the top corners of the door pulling it gently. Under the gasket in each corner
there is a recess with a guide to break through to use as screw positions for the panel. It is not necessary to
remove all the gasket, only a portion enough to make the recess accessible. After the gasket is moved
break through the guides, make sure not to damage the gasket.
Using the screws and supports included in the "installation kit", position the support in the recess and
secure the overlay panel screwing it from the inside of the drawer through the same hole left by the
removed screw until the panel is firmly attached to the drawer.
1
2
Break trough
Break trough the marked area in each
corner and use the (1) Overlay Support
and (2) Screw to secure the overlay Panel
Page | 17