Alpine AI-NET SEA-8081 Mode D'emploi page 76

Table des Matières

Publicité

Radar Sensor #1
Détecteur de radar #1
Sensor de radar #1
2
1
2
TX
PANIC
76
Radar Sensor #2
Détecteur de radar #2
Sensor de radar #2
and/et/y
(SEA-8481)
Basic Operation
Adding a Second Radar
Sensor
To provide increased protection for bigger
vehicles like pickup trucks, sport utility
vehicles, and recreational vehicles, an
additional SEC-8345 Dual Sector Radar
Sensor can be added. The second radar
sensor can be turned on and off as needed
for added flexibility.
Note: The radar sensor is not waterproof. If
this radar sensor is to be installed
outside the vehicle, it must be encased
in a waterproof enclosure. Consult
your Alpine dealer for more informa-
tion.
Turning the Second Radar
Sensor On and Off
Arm the system.
While the system is armed, press and
release the TX/PANIC and EXT1/VALET
buttons on the remote control transmitter.
The siren will acknowledge receipt of the
command by chirping the siren:
twice to indicate that the second radar
sensor is on.
three times to indicate that the second
radar sensor is off.
Note: Even if the security is disarmed and
rearmed, the second radar sensor will
remain in the same state until the
above procedure is repeated.
English

Publicité

Table des Matières
loading

Table des Matières