Alpine AI-NET SEA-8081 Mode D'emploi page 192

Table des Matières

Publicité

3.$
1
2
(SEA-8481)
3
1
TX
PANIC
2
(SEA-8481)
4
1
CHIRP(PRE-WARN)
DURATION [30SEC] 60SEC
TX
ARMING CHIRP [ON] OFF
PANIC
WARNING CHIRP [ON] OFF
2
(SEA-8481)
192
2
ACC
and/et/y
MODE
MODE
[MANU] AUTO
AUTO LOCK [ON] OFF
AUTO UNLOCK [ON] OFF
CAR NUMBER [1ST] 2ND
3RD
4TH
CHIRP
[SHORT] LONG
Using the CDA-7949
(sold separately)
Security Set-Up
1 Enter the vehicle.
Turn the ignition switch to the ON
position.
2 Turn on the power of the CDA-7949.
Press and release the EXT2/EXT3 and EXT
SELECT buttons simultaneously.
To change the setup feature 1 , press and
release the TX/PANIC button. To change the
setting of each feature 2 , press and hold the
EXT1/VALET button for at least 2 seconds.
When you are satisfied with the setup of
features in this screen, press and release the
Disarm/Valet switch to turn on and then off
quickly to advance to the next screen.
Note: When you change the car number,
also change the remote control side.Be
sure to press and release the TX/
PANIC button.
Again, to change the setup feature 1 , press
and release the TX/PANIC button. To change
the setting of each feature 2 , press and hold
the EXT1/VALET button for at least 2
seconds.
Press and release the Disarm/Valet switch to
turn on and then off quickly to advance to the
next screen.
English

Publicité

Table des Matières
loading

Table des Matières