Bestron DTF75 Mode D'emploi page 16

operAtion - General
The appliance is intended only for domestic use, not for professional use.
1. Fan tower
2. Fan housing
3. Front grill
4. Time switch
5. 'Stop/move' oscillating button
6. OFF button
7. Speed buttons
8. Power cord and plug
operAtion - before use for the first time
Remove the fan from the packaging and remove all packaging materials.
operAtion - Assembling the foot
1. Slide the two halves of the foot into each other. Make sure that the fan's power cord runs through the
opening, with the plug at the bottom side of the foot.
2. Use the two crosshead screws to mount the foot to the bottom of the fan.
3. Place the power cord in the notch under the foot.
operAtion - Ventilation
Press the OFF button and set the time switch to position 'OFF' before connecting the plug to the wall
socket; this will make sure that the appliance does not start immediately.
6
7
1
16
user's instructions
4
5
2
3
8
Figure 2
Assembling the foot