Télécharger Imprimer la page

South Shore 331 Instructions D'assemblage page 28

Masquer les pouces Voir aussi pour 331:

Publicité

21
21 .2
Locate the other bracket on the wall in the wall stud, 2 inches below the mounting bracket secured
to the back of your unit. Attach to the wall stud using 438-1 through the smaller hole of 438-3.
Placer l'autre support sur un montant du mur, environ 5 cm plus bas, par rapport au premier support
de fixation. Fixer le support 438-3 en passant la vis 438-1 dans le petit trou.
21 .3
Place the furniture into position so both mounting brakets are verticaly in line.
Lace the end of the restraint strap through the larger hole in each mounting bracket.
Confirm that the strap is securely laced and locked.
Positionner le meuble afin d'aligner verticalement les deux supports de fixation.
Passer l'extrémité de l'attache dans les plus grands trous des deux supports de fixation.
Vérifier que l'attache est solidement fixée et bloquée.
Need help? / Besoin d'aide? / Necessitas ayuda? 1-800-290-0465
21 .1
2"/5cm
Locate a stud in the wall behind the unit.
Does not have to be centered.
Localiser un colombage, dans la largeur du meuble.
Ne doit pas nécessairement être centré.
438-3
438-1
438-2

Publicité

loading