Energy Saving Tips - Avanti FFBM920WH Guide D'utilisation

 Energy Saving Tips
•
The unit should be located in the coolest area of the room, away from heat producing appliances or
heating ducts, and out of direct sunlight.
•
Let hot foods cool to room temperature before placing them in the unit. Overloading the unit forces
the compressor to run longer. Foods that freeze too slowly may lose quality, or spoil.
•
Be sure to wrap foods properly, and wipe containers dry before placing them in the unit. This cuts
down on frost build-up inside the freezer.
•
Organize and label food to reduce door openings and extended searches. Remove as many items
as needed at one time, and close the door as soon as possible.
 Interior Light – Removal / Replacement.
Before removing the light bulb, turn off the refrigerator first and then unplug the unit from the wall outlet.
Failure to do so could result in electrical shock or personal injury.
•
As shown in Figure step 1, remove the lamp cover;
•
As shown in Figure step 2, use left hand to press the LED light panel to inside along the direction of
arrow B and pull out the circuit boards along the direction of "arrow C" with flat head screwdriver.
•
As shown in Figure step 3, hold down of wire terminal with left hand and remove the LED lamp
circuit with right hand seizing the other wire terminal .
•
Replace with LED light that is the same shape and size.
•
Reinstall the LED light panel and lamp cover.
Step 1
Step 2
11
Step 3