Replacing Of The Illuminant; Trouble Shooting - Pkm KS 120.4A+ EB Mode D'emploi

5.2 Replacing of the illuminant

WARNING! Switch off and unplug
1.
the appliance before replacing the
illuminant.
2. Remove the cover.
3. Take out the illuminant.
4. Replace it by a new one (10W).
5. Reinstall the cover.
According to the EU regulation No. 244/2009, your appliance is classified as a
household appliance in accordance with the ecodesign requirements for
nondirectional household lamps. This means that bulbs, which are used in household
appliances, must not be used to illuminate domestic establishments.

6. Trouble shooting

Possible cause
The plug of the appliance is not
connected to the socket.
The plug has become loose.
The socket is not supplied with
energy.
The fuse is switched off.
The voltage is too low.
Incorrect energy supply.
The appliance has been switched off
for a while.
Too much or too hot food in the
appliance.
Doors opened too often or too
long.
Malfunction
T
HE APPLIANCE DOES NOT WORK AT ALL
T
HE COMPRESSOR DOES NOT WORK AT ALL
T
HE COMPRESSOR OPERATES FOR TOO LONG
Measure
Check the corresponding socket by
connecting it with another appliance.
Check the fuse box.
Compare the data on the model
plate with the data of your energy
supplier.
Check the energy supply.
The appliance needs some time to
reach the preset temperature.
Remove any hot food.
Do not open the door too
often/too long.
56
.
.
.