Changing Of The Hinge Position - Pkm KS 120.4A+ EB Mode D'emploi

3.3 Changing of the hinge position

WARNING! Switch off and unplug the appliance before changing the
hinge position. RISK OF ELECTRIC SHOCK!
CAUTION! The change of the hinge position must be carried out by at
least two persons; otherwise you may hurt yourself or damage the
appliance. Do not tilt the appliance more than 45
1. Unscrew the 2 screws (1+2) and remove the entire top hinge.
2. Lift the door upwards until you have removed it from the bottom hinge. Store
the door in a safe place so you will not damage it.
3. Unscrew the screws (3+4) of the bottom hinge and remove it.
4. Fix the former top hinge on the bottom with the 2 screws. Carry out the steps
described above in reverse order.
5. Check that the door is well-adjusted and closes properly before you finally tighten
the screws.
NOTICE! Adjust the door properly. The seal must close properly.
0
.
45