Safety Instructions - Kuda F561PN Mode D'emploi

Josef Kihlberg F561PN
KUDA PACKAGING
3
6 8 10
4 12
2 14
0 16
Original
KIHLBERG
SERVIS A NAHRADNÍ DÍLY
4
www.kuda-packaging.com

SAFETY INSTRUCTIONS

Inform yourself!
Read the operating
instructions carefully.
Protect yourself!
When operating the in-
dustrial stapler, wear eye,
.
and/or ear protection
Warning: Danger of
crushing!
Do not put your fingers
underneath the protector.
Do not remove protection
covers.
Warning:
Hazard!
Lay the compressed air
hose so that there is no
risk of tripping over it.
Do not exceed the air
pressure!
Do not exceed the re-
commended air pressure.
Use safety coupling!
For connecting the air
hose to the industrial
stapler, use only a safety
coupling.
Do not use a bottled air
or gas source!
Do not operate this in-
dustrial stapler by using a
bottled air or gas source.
Original
JOSEF KIHLBERG
staples must be used
exclusively.
Original
JOSEF KIHLBERG
spare parts must be
used exclusively!
Not using original spare
parts will void the warran-
ty and the liability.
+420 607 237 237
info@kuda-packaging.com
Use for the intended purpose
The industrial stapler is intended for stapling corruga-
ted cardboard.
This industrial stapler was designed and manufac-
tured for safe handling during the stapling operation.
Possible misuse
The industrial stapler is designed to be used only with
corrugated cardboard.
Servicing
The following maintenance work must be carried out
at regular intervals, varying with working conditions
and workload:
– daily check of compressed air pressure (4–6 bar).
– clean the industrial stapler regularly.
– check the condition of the industrial stapler at regu-
lar intervals for defects or worn parts. Never use a
industrial stapler that has defective or worn parts
(for sevice work refer also to chapters 7.1 and
7.2).
servis@josef-kihlberg.eu
06.14