Sony SA-VE315 Mode D'emploi page 9

Setting your amplifier
to enjoy movies
(SA-VE315 only)
For the Dolby Digital (AC-3)
If your amplifier is connected internally or
externally with a Dolby Digital (AC-3)
processor, you should use the setup menus
for the amplifier to specify the parameters of
your speaker system.
See the table below for the proper settings.
For details on the setting procedure, refer to
the manual that was provided with your
amplifier.
When "Hookup A" is used
(Speaker setup)
For Set to
Front speakers SMALL
Center speaker SMALL
Rear speakers SMALL
Subwoofer ON (or YES)
(Other setup)
Menu Set to
LFE MIX* –10 dB
BASS BOOST** ON
* Low Frequency Effect
**A function that reinforces the bass sound
When "Hookup B" is used
(Speaker setup)
For Set to
Front speakers LARGE
Center speaker SMALL
Rear speakers SMALL
Subwoofer OFF (or NO)
(Other setup)
Menu Set to
LFE MIX –10 dB
BASS BOOST ON
For the Dolby Pro Logic
If your amplifier is connected internally or
externally with a Dolby Pro Logic processor,
you should set the surround effect mode to
"NORMAL" on the amplifier for your
particular speaker system.
For details on the setting procedure, refer to
the manual that was provided with your
amplifier.
9 GB