Technical Data - Husqvarna 324LX- Série Manuel D'utilisation

Technical data

Engine
Cylinder displacement, cu.in/cm
Cylinder bore, inch/mm
Stroke, inch/mm
Idle speed, rpm
Recommended max. fast idle speed, rpm
Speed of output shaft, rpm
Max. engine output, acc. to ISO 8893, kW/ rpm
Catalytic converter muffler
Speed-regulated ignition system
Ignition system
Manufacturer/type of ignition system
Spark plug
Electrode gap, inch/mm
Fuel and lubrication system
Manufacturer/type of carburetor
Fuel tank capacity, US pint/litre
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg 5,1
Sound levels
(see note 1)
Equivalent sound pressure level at the user's ear,
measured according to ANSI B175.3-1997, dB(A),
min/max:
Vibration levels
Vibration levels at handles, measured according to
2
ANSI B175.3-1997, m/s
At idle, left/right handles, min.:
At idle, left/right handles, max.:
At max. speed, left/right handles, min.:
At max. speed, left/right handles, max.:
Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under various
working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.
NOTE! Noise pressure at the user's ear and vibration on the handles are measured with all the machine's approved cutting
equipment fitted. The table indicates the highest and lowest values.
TECHNICAL DATA
3
324Lx 324LDx
1,53/25,0 1,53/25,0
1,38/35 1,38/35
1,03/26 1,03/26
3100 3100
11000 11000
8300 8300
0,8 / 7000 0,8 / 7000
No No
No No
Ikeda Ikeda
NGK CMR5H NGK CMR5H
0,024/0,6 0,024/0,6
Walbro Walbro
1,06/0,5 1,06/0,5
11,9/5,4
90/97 90/97
1,9/1,8 1,7/1,6
2,2/1,9 2,2/1,7
5,8/5,5 3,2/4,5
6,1/5,7 5,4/5,6
English – 49