Télécharger Imprimer la page

HealthMate Velour Heated Seat Cushion Guide D'utilisation page 3

Publicité

Les langues disponibles

Les langues disponibles

This product should NEVER be used by any individual suffering from any physical ailment
that would limit the user's capacity to operate the controls or who has sensory deficiencies
in the lower half of their body.
DO NOT use this product as a substitute for medical attention.
DO NOT use on an infant, child, disabled person, sleeping, or unconscious person.
This appliance is intended for household use only.
SAVE THESE INSTRUCTIONS
SAFETY FIRST
With the implementation of the new heating coil and larger/redesigned patented pressure pad,
we have made this cushion as safe as possible. The DC adapter has a built-in fuse to protect the
cushion from overload and an LED on the DC plug to show when it is receiving power.
When seated on the Velour Heated Seat Cushion, the red LED on the controller will illuminate
indicating that the seat cushion is heating. When heating reaches maximum temperature
(
114°F) controlled by thermostat), the LED will diminish, indicating that the heating has
45.6 °C (
momentarily turned off to allow for cooling. Once the heating coils have cooled down to a safer
temperature, the heating will resume again.
INSTALLATION
Connect the metal hooks (sewn to the seam of the cushion in a small bag) to each strap. Slide
straps on rear of cushion over back of car seat. Attach each hook to a location under seat or to
opposing hook.
CONTROLLER
The controller features a new intuitive design with an upgraded PCB and LED light to indicate
when the device is heating. The three position switch (Hi-Off-Low) allows you to adjust the
heating level to your desired setting.
Wagan and HealthMate Products are trademarks of Wagan Corporation.
User's Manual—Read before using this equipment
©2019 Wagan Corporation. All Rights Reserved.
OR
3

Publicité

loading

Ce manuel est également adapté pour:

9448