Symbols; Description Of The Appliance And Its Accessories; Preparation; Use - Imetec F4302 Mode D'emploi

• Use the appliance only with the supplied accessories that are an essential
part of the appliance.
• DO NOT use extension cords or adaptors .

DESCRIPTION OF THE APPLIANCE AND ITS ACCESSORIES

Refer to Figure [A] in the Illustrative Guide to check the contents of the package.
1. Power switch
2. Ambient thermostat
3. Air intake grid.
• Unpack the product.
• Check that it is intact and not damaged.
• Connect the product to the domestic mains.
WARNING! This appliance is not to be used if it has been dropped
or if there are visible signs of damage.
• For fan operation, move the power switch (1) to the cool air position and adjust the ambient
thermostat (2) to the maximum temperature.
• For gradual heating, move the power switch (1) to the Hot air position with ECO function and
adjust the ambient thermostat (2) to the required temperature.
• For quick heating, move the power switch (1) to the rapid heating position and set the ambient
thermostat (2) on the required temperature.
• To switch the appliance off, turn the power switch (1) to off.
Anti-freeze function
This function assures maintaining the room temperature at around +5°C. The fan heater turns on

SYMBOLS

Warning
Prohibited
Do not cover
Appliance OFF
Cool air

PREPARATION

Hot air with Eco function
Rapid heating
Anti-freeze
Max temperature
Note
4. Technical data
5. Motor body and air outlet grid (front).

USE

EN
11