Indel Webasto Marine Isotherm DR16 Mode D'emploi page 51

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 87
User Manual
WARNING! Install the refrigerator in a dry place that's sheltered against water
spray. The unit's electrical components must NOT be exposed to rainfall and/or sprays of
water.
WARNING! Install the refrigerator away from gas or LPG cylinders.
WARNING! The product must be installed in an area accessible for any
maintenance. The housing space of live parts and of the condensing unit/compressor must
only be opened voluntarily and not directly accessible.
WARNING! The compressor/condensation unit installation area must be made
with a material resistant to the needle-flame test required by standard EN 603335---1 or
else be more than 5 cm from electrical and/or electronic components.
WARNING! If there is a battery charger, it must be connected to the battery and
never directly to the refrigerator.
WARNING! The appliance must be protected against indirect contact in
accordance with the "Heavy Current Regulations".
WARNING! In case of power connection from AC mains, to avoid the risk of
serious personal injury, ensure that it is equipped with cut-off devices (switches) which
permit total disconnection of the unit current and protective devices which automatically
intervene in the event of malfunction.
WARNING! Never touch any damaged or non-insulated electrical cables while
the electrical power supply is enabled. This observation is particularly true when the unit
is connected to 115Volt or 230Volt mains voltage.
49

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Isotherm dr30Isotherm bi16

Table des Matières