Operating This Unit; What's What; Head Unit; Display Indication - Pioneer DEH-112E Mode D'emploi

Operating this unit

What's what

Head unit

12 3 4
d c b
1 FUNCTION button
Press to recall the function menu when op-
erating a source.
2 AUDIO button
Press to select various sound quality con-
trols.
3 a/b/c/d buttons
Press to perform manual seek tuning, fast
forward, reverse and track search controls.
Also used for controlling functions.
4 CD loading slot
Insert a disc to play.
5 EJECT button
Press to eject a CD from your built-in CD
player.
6 DISPLAY button
Press to select different displays.
7 TA button
Press to turn TA function on or off. Press
and hold to turn AF function on or off.
8 DETACH button
Press to remove the front panel from the
head unit.
9 AUX input jack (3.5 mm stereo jack)
Use to connect an auxiliary device.
a 1 to 6 buttons
Press for preset tuning.
b SOURCE button, VOLUME
This unit is turned on by selecting a source.
Press to cycle through all the available
sources.
5 6
a 9 8 7
Press and hold to recall the initial setting
menu when the sources are off.
Rotate it to increase or decrease the volume.
c EQ button
Press to select various equalizer curves.
Press and hold to turn loudness on or off.
d BAND button
Press to select among MW/LW and two FM
bands and cancel the control mode of func-
tions.

Display indication

1
3 5
4
1 Main display section
Shows the various information such as
band, play time, and other setting.
! Tuner
Band and frequency are displayed.
! RDS
Program service name, PTY information
or frequency is displayed.
! Built-in CD Player
Elapsed play time is displayed.
2 Preset number/track number indicator
Shows the track number or preset number.
3 AF indicator
Appears when AF (alternative frequencies
search) function is on.
4 TP indicator
Appears when a TP station is tuned in.
5 TA indicator
Appears when TA (traffic announcement
standby) function is on.
6 RPT indicator
Shows when repeat play is turned on.
7 LOUD indicator
Appears when loudness is on.
2
6 7 8 9
En
Section
02
5