Télécharger Imprimer la page

Ritter MultiSchneider compact1 Mode D'emploi page 14

Masquer les pouces Voir aussi pour MultiSchneider compact1:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17
Risk of electric shock
– Always remove the mains plug
from the socket in the event of
a malfunction, before cleaning
and when the appliance is not
in use. When doing so, pull on
the plug and not on the cable.
– Never immerse the appliance in
water. Never expose the appli-
ance to rain or any other form
of moisture.
If the appliance falls into water,
unplug the cable from the
mains socket before removing
the appliance from the water.
Have the appliance inspected
at an authorized service
location before using it again.
– Always ensure that your hands
are completely dry before using
the appliance. Do not use the
appliance if it is wet or damp
or while you are standing on a
damp surface. Do not use the
appliance outdoors.
– Stop using the appliance
immediately if any parts are
damaged. Send the complete
appliance to the ritter after-
sales service in this case.
– If the mains cable is damaged,
it must be replaced by the man-
ufacturer, the manufacturer's
after-sales service or a similarly
qualified person to eliminate
risk of personal injury.
Risk of injury
– This appliance must not be
used without a slice carriage
or a left-over holder, unless
the size and shape of the food
to be sliced means that these
parts cannot be used.
– The appliance must be
switched off before changing
accessories or add-on parts
which move when operated
and then disconnected from the
mains.
– The rotary blade is extremely
sharp.
– Never touch the rotating blade
when the appliance is operat-
ing!
– Switch the appliance off before
cleaning it; pull the mains plug
out off the socket and turn the
slice thickness adjustment knob
to the "0" position.
– The rotary blade will continue
to run for a short time after
being switched off.
English
9

Publicité

loading

Ce manuel est également adapté pour:

Multischneider sono1Multischneider sinus1