Declaration Of Conformity - Elcoman KOBRA +2 Mode D'emploi

If you have any problems with your shredder, check the symptoms and remedies described below.
If you are unable to solve the problem this way, contact your nearest Kobra dealer.
Do not open the head of the shredder to attempt to repair it yourself. You could get a serious electric shock and
invalidate your warranty
PROBLEM
The shredder does not
start
The shredder never
stops
Considerable reduction
in shredding capacity
(only on Kobra +3
models)
Compliant with
The manufacturer
hereby declares that the KOBRA shredders listed below are compliant with the standards of directive LVD 2006/95/CE
- Kobra series: Kobra +2, Kobra +3
Standards applied are :
EN 60950-1:2006 / A11:2009 /A1:2010/A12:2011
EN 55014-1 :2006
EN 55014-2 :1997 + A1 :2001
Bovisio Masciago, 16.12.13
A.DE ROSA
Technical Office
SIGNS
- The Energy Smart
light (G) does not
come on
- When paper is
inserted into the front
slit the machine does
not start
- When the Trasparent
Sqwinging Cover ( D )
is opened the machine
does not start.
- Light ( B ) switched
on, shredder blades in
operation
- Capacity reduced
compared with than
the declared capacity

DECLARATION OF CONFORMITY

- LVD Directive (2006/95/CE)
- RoHS Directive (2011/65/EU )
- CEM Directive (2004/108/CE)
ELCOMAN SRL
VIA GORIZIA,9 20813 BOVISIO MASCIAGO (MB) – ITALY-
TROUBLE-SHOOTING
CAUSE
- Button position position ( A )
- Paper bin ( 2 ) incorrectly
positioned on the Stand ( 4 )
- Cable not properly connected
- No power suplly
- Trasparent Swinging Cover
( D ) not closed
- Hand Guard Flap ( E ) not
closed properly
- Reflective Glass on Hand
Guard Flap is dirty
- Material and/or dirt on
electronic eyes ( C )
- Cutting blades not oiled.
EN 61000-3-2 :2000/A2 :2005
EN 61000-3-3 :1995/A2 :2005
EN 61000-4-2 :1995/A2 :2001
EN 61000-4-3 :2006
10
ACTION
- Turn switch to the position (I)
- Check that the cable is plugged
in properly
- Check that socket is switched on.
- Close the door properly
- Close the Trasparent Swinging
Cover
- Close the Hand Guard Flap
properly
- Remove the dirt on the
Reflective Glass
- Remove dirt from electronic
eyes
- Oil the cutting blades.
EN 61000-4-4 :2004
EN 61000-4-5 :2006
EN 61000-4-6 :1996/A1 :2004
EN 61000-4-11 :2004