Télécharger Imprimer la page

Domo KX012 Mode D'emploi page 18

Masquer les pouces Voir aussi pour KX012:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 7
REPLACE THE LAMP
· Always put the on/off switch in the 'OFF' position and disconnect the appliance from the
main supply outlet before cleaning.
· Remove the drip tray by lifting it up slightly and then towards you.
· Remove the two screws on the rear of the appliance. There is no high voltage grille for the
bulbs on this side. The screws are located at the top on the protection grille.
· Open the protection grille.
· Remove bulbs by first rotating them quarter-turn, and then pulling them towards you.
Insert the new bulb and rotate it a quarter-turn to secure.
· Close the protection grille and put the screws back in place.
ENVIRONMENTAL GUIDELINES
18
KX012
This symbol on the product or on its packaging indicates
that this product may not be treated as household waste.
Instead it must be brought to the applicable collection point
for recycling of electrical and electronic equipment. By
ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment
and human health, which could otherwise be caused by
inappropriate waste handling of this product. For more
detailed information about recycling of this product, please
contact your local city office, your household waste disposal
service or the shop where you purchased the product.
The packaging is recyclable. Please treat the packaging
ecologically.

Publicité

loading

Produits Connexes pour Domo KX012