Westfalia Wetelux 95 14 07 Mode D'emploi Original page 6

Intended Use
The LED plant grow light is intended to support the growth of plants. It is not
suitable for Illumination.
Assembling and Setting up
Hang the LED Plant grow light in a suitable position. The light should reach the
plants from straight above to prevent them from growing to one side.
Connect the power plug to a suitable wall socket.
To turn the plant grow light on and off operate the on/off switch on the back of
the lamp.
Cleaning
 Wipe the housing of the device with a lightly moistened cloth. Use detergent
as needed. Do not immerse the device in water or any other liquid.
 Do not clean the device with aggressive chemicals or abrasives in order not to
damage the surfaces.
Technical Data
Radiation angle:
Average service life:
Operating voltage:
LEDs:
PPFD:
Dimensions:
Weight:
Suspension Height:
With 1,5 m power cord and plug
Operation
120°
30.000 h
230 V~, 50/60 Hz, 35 W
84 pcs. red, 45 lm, 620 – 630 nm, 2,2 V
10 pcs. blue, 25 lm, 460 – 470 lm, 3,2 V
2 pcs. white, 2,7 V, 36 lm, 6500 K
2 pcs. UV, 1,5 lm, 390 – 400 nm, 3,5 V
2 pcs. IR, 1,5 lm725 – 735 nm, 1,8 V
2
850 μmol/m s at 30 cm
25,8 cm x 25,8 cm, height 4,5 cm
931 g
31,5 cm
6