Troubleshooting - FAURE FSM17100 Notice D'utilisation

Notes on cleaning:
• Clean the front of the appliance with a soft cloth with
warm water and a cleaning agent.
• To clean metal surfaces, use a usual cleaning agent.
• Clean the appliance interior after each use. Then you
can remove dirt more easily and it does not burn on.
• Clean stubborn dirt with a special cleaner.

Troubleshooting

Warning! Refer to the Safety chapters.
Problem
The appliance does not op-
erate.
The appliance does not op-
erate.
The appliance does not op-
erate.
The appliance does not op-
erate.
The lamp does not operate.
There is sparking in the cavi-
ty.
There is sparking in the cavi-
ty.
The turntable set makes
scratching or grinding noise.
The appliance stop to oper-
ate without a clear reason.
If you cannot find a solution to the problem yourself,
contact your dealer or the customer service centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Possible cause
The appliance is deactivated.
The appliance is not plugged in.
The fuse in the fuse box is blown.
The door is not closed properly.
The lamp is defective.
There are metal dishes or dishes with
metal trim.
There are metal skewers or aluminium
foil that touches the interior walls.
There is an object or dirt below the
glass cooking tray.
There is a malfunction.
• Clean all accessories regularly and let them dry. Use
a soft cloth with warm water and a cleaning agent.
• To soften the hard to remove remains, boil a glass of
water at full microwave power for 2 to 3 minutes.
• To remove odours, mix a glass of water with 2 tsp of
lemon juice and boil at full microwave power for 5 mi-
nutes.
Activate the appliance.
Plug in the appliance.
Check the fuse. If the fuse blows more
than one time, contact a qualified elec-
trician.
Make sure that nothing blocks the door.
The lamp has to be replace.
Remove the dish from the appliance.
Make sure that the skewers and foil
does not touch the interior walls.
Clean the area below the glass cooking
tray.
If this situation repeats call the custom-
er service center.
The necessary data for the customer service center is
on the rating plate on the appliance.
.........................................
.........................................
.........................................
Remedy
9