Pioneer SC-LX86 Guide Rapide page 2

Enjoy easy multichannel playback with this unit in 3 steps:
Connecting up →
Convenient with easy connection and initial setup upon following the instructions displayed on-screen by installing
AVNavigator (in the included CD-ROM). Start connecting by choosing one method from among the following in accordance
with your play environment.
Connection and initial setup by
referring to this Quick Start Guide
Move on to
1
Using AVNavigator
2
2
Initial setup →
Connection and initial setup
Connection and initial setup
following the instructions in the
"Wiring Navi" in AVNavigator
(Connection to the nework is required for
Quick Start
Guide
It is unnecessary to read this guide for explanations;
in this guide.
and
Load the included CD-ROM into your computer's CD drive.
• The CD-ROM's top menu screen appears.
• AVNavigator can be used with Microsoft
• The supported browser is Microsoft Internet Explorer 8 or 9.
® ®
• Adobe Flash Player 10 must be installed to use some of the functions in
AVNavigator. For detail, see http://www.adobe.com/downloads/.
Click 'Install AVNavigator' from the CD-ROM top menu.
English
Basic playback.
the initial setup.)
AVNavigator
will be explained in the "Wiring Navi"
in the "Operation Guide".
3
Follow the instructions on the screen to install.
When "Finish" is selected, installation is completed.
® ®
Windows XP/Vista/7.
4
Remove the included CD-ROM from the computer's CD drive.
5
Click [AVNavigator] on the desktop to launch AVNavigator.
• AVNavigator is launched and Wiring Navi starts up.
• Depending on the network or security settings on the computer on which
Connect by following the
instructions in the "Wiring Navi"
in AVNavigator
(For when the receiver is not to be
connected to a network.)
will be conducted in the "Wiring Navi".
Refer to "Wiring Navi" to make the connections,
and once connections are completed proceed
to and
AVNavigator is to be installed, AVNavigator's functions may not work
properly.
AVNavigator
herein.