Publicité
eNet interface IP radio
Température ambiante
Degré de protection
Dimension L×l×H
USB
Port USB
Longueur de câble
LAN
Raccord
Fréquence radio
Puissance d'émission
Portée émetteur en champ libre
Catégorie de récepteur
6.2 Liste de paramètres
i Seulement avec logiciel de eNet Server jusqu'à la version 1.4 :
Les paramètres d'appareils peuvent être modifiés avec le serveur eNet :
Device and channels
Parameters
Function
Operating mode
Device settings
Parameters
IP address
Subnet mask
Standard Gateway
DHCP
82589523
J0082589523
Setting options, Basic set
ting
Rocker, Scene, Unused
Basic setting: Rocker/Scene
App use, lock-out protection,
forced operation
Basic setting: App use
Setting options, Basic set
ting
Freely-settable IP address
Basic setting: 192.168.0.23
Freely-settable subnet mask
Basic setting: 255.255.255.0
Freely-settable IP address
Basic setting: 192.168.0.1
On, Off
Basic setting: On
6/8
0 ... +45 °C
80×76×25,5 mm
Micro-prise
Douille RJ45 8 pôles
868,0 ... 868,6 MHz
max. 20 mW
typ. 100 m
Explanations
Rocker
The channel works as a chan-
nel button.
Scene
The channel works as a scene
button.
Unused
The channel is not displayed
in the eNet SMART HOME
app and is disabled for use in
the commissioning interface.
Setting the type of scene used
for a scene channel.
Explanations
Setting of the IP address of
the IP Gate.
Setting of the subnet mask.
Setting of the Standard Gate-
way.
Activate the DHCP client.
Automatic allocation of the
network configuration of the
eNet server via a DHCP (Dy-
namic Host Configuration Pro-
tocol). When DHCP is activa-
ted, on each switch-on, the
eNet server requests its IP ad-
dress from the DHCP server,
along with the subnet mask,
standard gateway and, if ne-
cessary, DNS address.
IP 20
max. 3 m
2
29.03.2017
Publicité
