Replacing And Disposing Of The Battery - Beha-Amprobe PRM-6-EUR Manuel De L'utilisateur

Replacing and Disposing of the Battery

Warning
W
• To avoid electric shock, disconnect the test leads from the source before
opening the PRM-6-EUR for battery replacement.
• To avoid false readings, which could lead to possible electric shock or
personal injury, replace the battery as soon as the battery is low or
dead.
=
Note: The PRM-6-EUR contains alkaline battery. Do not dispose of the
battery with other solid waste.
Used batteries should be disposed of by a qualified recycler or hazardous
materials handler. Contact your authorized Amprobe Service center for
recycling information.
The PRM-6-EUR uses two 1.5 V AAA batteries (supplied). To replace the
batteries, follow these steps and refer to Figure 3:
1. Disconnect test leads from any power source.
2. Place the PRM-6-EUR face down on a nonabrasive surface and loosen the
battery-door lock with a flat screwdriver.
3. Lift the battery cover away from the PRM-6-EUR.
4. Replace the batteries as shown in Figure 3. Observe the battery polarity
shown in the battery compartment.
5. Replace the battery cover to the lock position.
Figure 3: Replacing batteries
10