Maintenance; Cleaning - Beha-Amprobe PRM-6-EUR Manuel De L'utilisateur

Operating altitude
Humidity (Without condensation)
Storage conditions
Power supply
Battery life
Dust/water resistance
Pollution degree
Dimensions (H x W x D)
Weight
Product Standard
Electrical safety
Overvoltage category
EMC
Agency approvals

MAINTENANCE

Caution
W
To prevent damage to the PRM-6-EUR:
• Do not attempt to repair or service the PRM-6-EUR unless qualified to
do so.
• Make sure that the relevant calibration, performance test, and service
information is being used.
• Do not use abrasives or solvents. Abrasives or solvents will damage the
PRM-6-EUR case.

Cleaning

The only maintenance the PRM-6-EUR requires is inspection and cleaning.
Periodically wipe the case with a mild solution of detergent and water. Apply
sparingly with a soft cloth and allow to dry completely before using. Do not
use aromatic hydrocarbons, gasoline or chlorinated solvents for cleaning.
Up to 2000 m
≤
80% RH
0 C to 40 C (32 F to 104
O O O
2 x 1.5 V AAA alkaline battery
Minimum 2 years for average use
IP 40
2
137 x 65 x 33 mm (5.43 x 2.56 x 1.3 in)
170 g (0.38 lb) (battery installed)
EN 61557 -1/-7
EN 61010-1, EN 61557-7
CAT IV 600 V
Conforms to EN 61326-1
)
P
9
F), ≤ 80% RH
O