Sangean UCR-100 Mode D'emploi page 10

Alarm setting:
1. Touch the key
(or Radio alarm time). The display will show back the present
time after 7 seconds. Or you can touch the same key to go
back to the present time.
2. While the display is showing the alarm time (after the key
is touched), touch the key
the alarm time adjustment.
3. Now the hour digits are flashing. Touch the key
to adjust the hour.
4. Touch the key
Touch the key
5. If you are setting the Buzzer alarm, press the key
complete the setting. If you are setting the Radio alarm,
touch the set key, adjust the alarm radio frequency by touching
the TUNING UP/DOWN keys, then press the key
complete the setting.
* When the radio station signal is too weak when the Radio alarm
is activated, the alarm will become Buzzer alarm.
9
(or ), to check the Buzzer alarm time
then the minute digits are flashing.
and to adjust the minute.
for 2 seconds to enter
and
or
to
to