Publicité
Les langues disponibles
Les langues disponibles
Technical Data
Automix 90
Nominal voltage
Power input
Rated current
Order no.
Frequency:
Rated speed
Tank volume:
Batches up to:
Stirrer holder:
Protection class:
Degree of protection:
Weight:
Interference suppression:
Stirrer with stand, bucket, stirring rod and operating instructions in
cardboard box.
Application for Indented Purpose
The Automix 90 tool is intended to be used to prepare and mix ready-
mixed plaster, mortar and concrete as well as gypsum, lime and other
building materials of medium to high viscosity and a maximum quantity of
80 kg.
General Instructions
The tool may be used only completely mounted with the stand supplied
along with it.
The tool's working spindle is equipped with a M20 female thread.
Thread and front surfaces must be kept clean.
When assemble the stirring rod put the copper ring
the tool between spindle and stirring rod to simplify the removal of the
stirring rod.
The stirring rod should be detached using a SW 27 open-end wrench.
Supply
230 V ~
1500 W
7,0 A
07617
50 - 60 Hz
50 rpm
90 l
80 kg
M 20, female thread
II
IP 20
approx. 35 kg
acc. to: EN 55014 and EN 61000
5a
16
110 V ~
1500 W
14,5 A
07618
supplied along with
Publicité
