Hudora 83317 S Mode D'emploi page 4

INSTRUCTIONS ON USE
EN
CONGRATULATIONS ON PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral component of the
product. Therefore, please store them and the packaging carefully in case questions arise in
the future. Please always include these instructions when handing on the product to a third
party. This product must be assembled by an adult. This product is designed for private/
domestic use only. This product is not designed for commercial/industrial use. The use of
the product requires certain capabilities and skills. Always adjust according to the age of the
user and use for the purpose it has been designed for.
TECHNICAL SPECIFICATIONS
Item: Protection Set Skate Wonders
Item number: 83317 (S) | 83318 (M)
Purpose: This set of protectors is designed to protect impact cause by collision
of part of the body with an obstacle while doing roller sports. It has
passed EN14120:2003 + A1:2007 to show conformity to the EHSR of EU
2016/425. These protectors are for level 1 - for the normal roller skate
sport. They are not suitable for acrobatic roller skate sport, which refers
to level 2 protectors.
Weight class
EN14120:2003 + A1:2007
A
B
C
CONTENTS
1 Pair of palm protectors | 1 Pair of elbow protectors | 1 Pair of knee protectors | 1 Bag |
1 Manual
Other items included are meant to facilitate safe transportation and are not required for the
installation and use of the product.
SAFETY INSTRUCTIONS
• These protectors are suitable for users of cycles, skateboards, roller skates and inline
skates. These protectors are not suitable for use on motorcycles. They are not suitable
for acrobatic or high-speed skateboarding and skating.
• Your protectors must fit correctly, so that they do not move during a fall. Before you
get moving make sure that everything is positioned correctly. The protectors should sit
comfortably. It is extremely important to first make sure that the protectors offer you
sufficient free room even when closed to ensure there is no risk cutting off your blood
circulation.Remember never to skate without your protectors and a helmet!
• Before each use, especially after a fall or accident, check the protectors for damage. The
protectors should be discarded and replaced if the shell shows denting, cracking, deep
scratches or discolorations/the padding underneath the shell is compacted or has holes
the straps no longer fasten, have become overstretched, torn or abraded/the protectors
no longer fit or cover the intended areas!
• Do not make modifications in any way that may impair the safety of the products!
• Even under the correct use, your protectors cannot guarantee you 100% protection
against injury. Always carry out your sport carefully. To reduce the risk of injury, skate
sensibly and within your ability.
• The protectors will only offer limited protection in the even to flow velocity impacts with
stationary hard surfaces!
• These protectors are not intended to provide protection in the event of a serious fall when
travelling at speeds in excess of 13 km/h!
• They may not protect the wearer in the event of the collisions with moving vehicles!
• Changes in environmental conditions, such as temperature, may significantly reduce the
performance of the protector!
• Contamination, alteration to the protector, or misuse may dangerously reduce the perfor-
mance of the protector!
• In the case of proper maintenance and storage, the maximum service life of the pro-
tectors is 5 years after the production date. After this period, the protectors must be
replaced.
All images are examples of the design.
For Protectors
user weight
S
< 25 kg
25 - 50 kg
> 50 kg
USAGE INSTRUCTIONS
The size classes are just for orientation. If the protectors do not sit firmly and comfortably
another size should be chosen.
The impact-resistant upper shell (PP) and shock-absorbing foam padding (EVA) minimise
the impact effects in the case of a fall and prevent chafing and pressure points. The main
components of the protectors are nylon, polypropylene and elastane.
Palm protectors (Fig. 1):
Help to protect your wrist during a fall. The support under the hand helps to cushion the fall.
The protector holds the hand in its safest position – "the hammer grip" – to minimise wrist
fractures. This reduces the force on the radius arm. The shape helps to minimise grazes on
the fingers and helps you to glide during a fall.
Elbow protectors and knee protectors (Fig. 2 | 3):
Help you glide along the asphalt when falling, so that the fall is cushioned.
HOW TO PUT ON YOUR PROTECTORS
If children use the protectors, adult supervision is recommended during fitting. Always wear
the protectors on the correct side. The left side is marked with an "L", the right side with
an "R".
M
Palm protectors:
Open the hook and loop fastening and insert your thumb into the hole, so that the palm of
your hand lies on the cushioned back of the shell. The protector should be fitted so that the
crash plate protects the palm and wrist. Now tighten up the straps and fasten the hook and
loop bands for a comfortable fit.
Elbow protectors and knee protectors:
Open the hook and loop fastening and pull on the sock. Fit the elbow protectors so that the
point of the elbow is fitted snugly into the centre of the elbow protectors. And ensure that
the knee protectors are placed symmetrically over the kneecap. Fix the straps and hook and
loop bands so that the protectors are secure.
MAINTENANCE AND STORAGE
Use a dry or damp cloth only to clean the product; do not use special cleaning agents!
Check the product for damage or traces of wear and tear before and after each use. Do
not make any structural changes. For your own safety, please use original spare parts only.
These can be sourced from HUDORA. If parts become damaged or if sharp edges or corners
should develop, the product may not be used any more. If in any doubt, please contact our
service team (http://www.hudora.de/service/). Store the product in a safe place where it is
protected from the elements, cannot be damaged, and cannot injure anyone.
Do not machine wash! Do not use strong cleaners or detergents! Do not iron! Do not tumble
dry! Do not bleach!
Always clean with a damp cloth and mild detergent. Use of chemical and cleaning solvents,
paints and abrasive can cause unseen damage to the pads and reduce their ability of
protection. Use clear water only. If your protectors are very dirty try to clean them gently
with luke warm water and a brush. Rinse the protectors with clear water. Do not dry the
protectors on a heating. After use you should try to air your protectors in a room with good
air circulation. Never leave your protectors exposed to direct sunlight or heat. Elevated
temperature beyond 40° C would dangerously reduce the performance of the protectors.
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate collection point
provided in your area. Local waste management companies will be able to answer your
questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise however, we put just
as much effort into rectifying them. Therefore, you can find numerous information on the
product, replacement parts, solutions to problems and lost assembly manuals at http://
www.hudora.de/service/.
4/8