Publicité
Les langues disponibles
Les langues disponibles
KNOWING YOUr GLUE GUN
8
1.
On/Off Switch
2.
On/Off LeD Indictor
3.
Nozzle
4.
Feed Trigger
5.
Battery Pack
UNPACKING AND CONTENT
:
IMPOrTANT
is faulty or that a part is missing. If you find anything wrong, do not operate the tool until
the parts have been replaced or the fault has been rectified. Failure to do so could result
in serious personal injury.
CONTENTS IN PACKAGE
Description
Glue Gun
Charging Stand
Glue Sticks
OPErATION
WArNING:
important safety warning and instructions before using this tool.
WArNING:
removal of the battery pack.
INSTALLING OR REMOVING THE BATTERY PACK
(FIG 2)
• To install the battery pack, insert the battery pack (5) from the bottom of the
tool all the way until it locks in place with a click, as shown in FIG 2.
• To remove the battery pack, slide the battery locking tab (6) to the left as
shown in FIG 2, to release the battery pack, then pull the battery pack out.
9
3
7
6.
Battery Locking Tab
7.
Glue Sticks
8.
Charging Adaptor
9.
Charging Stand
Due to modern mass production techniques, it is unlikely the product
:
QTY
Description
1
Battery Pack (GLAB08B)
1
Charging Adaptor
6
Operator's Manual
To reduce the risk of serious personal injuries, read and follow all
Always be sure that the tool is switched off before insertion or
4
FIG 1
2
1
6
5
QTY
1
1
1
5
FIG 2
6
7
Publicité
