freeVoice FOX FX810B Manuel D'utilisation page 11

E
Content
Product overview
Content of package
Headset Fox FX 810 DECT
Base station Fox FX 810 DECT
Installation
Fastening the headband to the headset
Connection to a desk phone
Desk phone without headset connection
Desk phone with handset lifter
Desk phone with headset connection
Connection to an EHS-enabled phone
Power supply
Headset operation
Switching on / off
Logging the headset onto the base station
Configuring the audio link to the desk phone
Setting the dial tone
Setting the microphone level
Call acceptance
Volume control
Mute microphone (function table)
Switching from the desk phone to the headset
Switching from the headset to the desk phone
Enabling the DHSG mode
Enabling RHL mode
Logging on a secondary headset
Holding a conference call
Terminating and leaving an active conference
Logging off from the master base station
Technical data
Headset Fox FX 810 DECT
Base station Fox FX 810 DECT
Disposing of the product
22
sup fv fox810 anleitung duo.indd 22-23
Connection to a desk phone
Desk phone without headset connection
3 This phone model has no separate headset socket.
3
4
23
23
23
24
24
1 Unplug the handset's cable from the socket of your desk phone.
2 Plug the handset's cable into the socket marked with the handset symbol on the base station.
24
3 Plug the enclosed phone lead into the socket marked with the phone symbol on the base station.
4 Connect the other end of the phone lead to the handset socket on your desk phone.
25
Desk phone with handset lifter
25
A lifter raises the desk phone's handset mechanically to make or take a call. Please consult the
25
lifter's documentation for instructions on its installation.
25
26
26
26
26
26
27
27
27
27
27
28 1 Unplug the handset's cable from the socket of your desk phone.
28 2 Plug the handset's cable into the socket marked with the handset symbol on the base station.
3 Plug the enclosed phone lead into the socket marked with the phone symbol on the base station.
4 Connect the other end of the phone lead to the handset socket on your desk phone.
28 5 Plug the lifter's cable into the socket marked «AUX» on the base station.
29
29
E
23
21.07.17 15:43