Frequently Asked Questions - Miele SEB 228 Electro Plus Instructions D'utilisation

en-US

Frequently asked questions

The Powerbrush switches itself off.
The overheating protection mechanism
has been activated due to overheating
or a blockage.
 Disconnect the vacuum cleaner from
the power supply immediately. Switch
off at the wall socket and unplug it.
 Check the vacuum cleaner for any
blockages and check all the filters in
the vacuum cleaner.
The Powerbrush has to cool down. To
speed up this process:
 Reconnect the vacuum cleaner and
switch it on.
The Powerbrush will be ready for use
again after about ten minutes.
Maintenance and care (Fig. 9)
Removing threads and hairs
 Always disconnect the vacuum
cleaner from the power supply for
maintenance work and for cleaning.
Switch off at the wall socket and un-
plug it.
 Use scissors to cut any threads or
hairs which have wound around the
roller brush. There is a groove on the
roller to guide you.
Then run the vacuum cleaner to vac-
uum up the bits.
8