Technical Safety; Proper Use - Miele SEB 228 Electro Plus Instructions D'utilisation

Technical safety


Check the voltage rating of the powerbrush before connecting it to
the vacuum cleaner. Your power supply should correspond to the
voltage rating listed on the data plate of both the powerbrush and
the vacuum cleaner. Use only AC outlets. Connecting the vacuum or
powerbrush to a higher voltage than indicated on the data plate will
damage the powerbrush and may result in personal injury.

Before using the Powerbrush, Electro hose, and the Electro tele-
scopic wand, check for externally visible damage. Do not operate
damaged parts under any circumstances.

Repairs to the Powerbrush, electro hose and electro wand during
the warranty period should only be performed by a Miele-authorized
service technician.

Do not allow the vacuum cleaner or Powerbrush to get wet. Clean
only with a dry or slightly damp cloth. If any moisture gets into the
appliance, danger of electric shock.

The electro-suction hose and the telescopic wand contain electri-
cal wires. The plug connectors must not come in contact with water.
These items may only be cleaned with a dry cloth, no moisture can
touch them. Danger of electric shock

All repair work should be performed by a qualified technician in
accordance with national and local safety codes. Repairs and other
work by unqualified persons could be dangerous.

Proper use


Never touch the roller brush while it is rotating.

Accessories and wands must not be used at head level.

Keep the Powerbrush away from curtains, clothing, etc. as these
could be vacuumed in and become entangled in the roller brush.
en - IMPORTANT SAFETY INSTRUCTIONS
3