Heating Of Ready-To-Serve Food In Baby Jars - Reer basic Mode D'emploi

5. Heating of ready-to-serve food in baby jars:

Food jars can also be quickly, reliably and automatically re-heated with the equipment. The heating plate in
the equipment bottom heats up and transfers its warmth on to the jar that needs heating. Once the pre-set
temperature has been reached, the equipment will automatically shut off.
Activation
Place the jar in the baby food warmer
and fill the water container completely with water.
Temperature range 4: suitable for small food jars
Temperature range 5: suitable for larger food jars
The optimal heating temperature is reached in approx. 8 min and the control lamp goes off.
Depending on the content and the quantity, the time to heat can be longer or shorter. We recom-
mend stirring the food often to allow an even distribution of the warmth.
When heated, take the jar out of the baby food warmer
and turn the switch for the temperature setting anti-clock
wise to the stop.
Attention: It is imperative that you check the temperature of the content prior to giving the
food to the child..
page 12
Remove the label from the jar prior to the warming
process. This prevents the label from detaching from the
jar during the heating process and from sticking to the
water container of the baby food warmer. Unscrew the
jar's lid before you place it in the water.
Place the jar in the baby food warmer,
set the desired temperature with the turn switch (c) on
the front. The red control lamp will glow.
Attention:
Always place the equipment onto a dry
and even surface.
Make sure that there is enough water
in the container prior to the heating
process.
The inner water container has to be
completely filled with water when a
bottle or jar is inserted.