Mobile And Manufactured Home - Osburn 2500 Manuel D'installation

MOBILE AND MANUFACTURED HOME

For a mobile and manufactured home installation, it is mandatory to
• Connect the stove to a vent system who is:
• In Canada : certified according to the standard ULC/ORD-C441 or CAN/ULC-S609. A chimney
meeting the requirements of ULC S629M can also be used.
• In the United States, certified according to the UL 641 standard. A chimney that meets the
requirements of UL 103 standard may also be used.
• Connect the stove to an outside combustion air source (fresh air).
• Attach the stove to the structure of the mobile / manufactured home with two screws. Use the two
anchoring holes located on each side of the pedestal, as shown .
WARNING : DO NOT INSTALL IN A SLEEPING ROOM.
CAUTION : THE STRUCTURAL INTEGRITY OF THE MOBILE / MANUFACTURED
HOME FLOOR, WALL, AND CEILING / ROOF MUST BE MAINTAINED.
Page 20
Anchoring holes location
Installation Manual - 2500