Télécharger Imprimer la page

Epson OT-CH60II Manuel De L'utilisateur page 3

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 26
For American Users:
WARNING:
This product contains chemicals, including lead, known to the State of California to cause birth
defects or other reporoductive harm. Wash hands after handling.
Standards and Approvals
Product Name:
OT-CH60II
Model Name:
M293A
The following standards are applied only to the battery chargers that are so labeled. (EMC is tested using EPSON
power supplies.)
Europe:
CE Marking
North America:
FCC Class A, ICES-003 Class A
Oceania:
AS/NZS CISPR22 Class A
CE Marking
The battery charger conforms to the following Directives and Norms:
Directive 2004/108/EC
The connection of a non-shielded printer interface cable to this printer will invalidate the EMC standards of this
device. You are cautioned that changes or modifications not expressly approved by Seiko Epson Corporation
could void your authority to operate the equipment.
FCC Compliance Statement For American Users
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user
will be required to correct the interference at his own expense.
For Canadian Users
This Class A digital apparatus complies with Canadian ICES-003.
À l'intention des utilisateurs canadiens
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Utiliser exclusivement un cordon d'alimentation homologué CSA/UL, type polarisé, type SPT-2 ou plus gros,
cuivre calibre 18 AWG minimum, pour tension nominale 125 ou 250 V, minimum 1 A, de longueur comprise
entre 1,8 et 3 m.
Türkiye'deki kullanýcýlar için
AEEE Yönetmeliğine Uygundur.
EN 55022 Class A
EN 55024
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-11
WARNING
3

Publicité

loading