Tenovis Integral T 3 Notice D'installation page 16

Parameterisation I5
The CTI-/audio-link offers the option of operating several
applications in parallel:
CTI-application
By default, the CTI-link is preset for TAPI-applications. For
Com4Tel, for example, you do not have to set any further
transmission parameters.
If you want to use another standard TAPI-application, you
have to install the SPI-driver for the enclosed Mini-CD
"SPI-T3". On the Mini-CD you will find additional information
on all of the AEI-Y-messages supported, as well as the
AT-commands supported.
Instead of a TAPI application, you can also connect other
applications (e.g. printer, dummy module, VIP call-switch-
board, GDV etc.).
If you want to connect these applications to your telephone,
please contact Tenovis Service.
and DSS-module (max. 3 modules)
and headset or comfort-headset or ext. hands free
device or second handset or recorder
6