Publicité
Les langues disponibles
Les langues disponibles
Parameterisation I33/I55
The CTI-/audio-link offers the option of operating several
applications in parallel:
CTI-application
By default, the CTI-link is preset for TAPI-applications. For
Com4Tel, for example, you do not have to set any further
transmission parameters.
If you want to use another standard TAPI-application, you
have to install the SPI-driver for the enclosed Mini-CD
"SPI-T3". On the Mini-CD you will find additional information
on all of the AEI-Y-messages supported, as well as the
AT-commands supported.
For other CTI-applications, you can set the transmission
parameters protocol, dialling mode, baud rate and character
format in the T3-telephone's "CTI setting" menu. Under
"Dialling mode" you can set whether the T3-telephone
should be in hands free mode (FRE on dialling) after
successful dialling from the CTI-application.
For the other settings to be carried out, please refer to the
details provided in the operating manual for the relevant
CTI-application.
and DSS-module
and switching contact-module
(e.g. for door device, second alert)
and headset or comfort-headset or ext. hands free
device or second handset or recorder
5
Publicité
