Zehnder Pumpen Kompaktboy Duplex 1,1 D 400V Mode D'emploi page 70

5.5.2.1 Optional shut-off valve in the pressure line
i
70
Kompaktboy Single
1.
2. Insert the threaded bolt (M16x80) into hole 1 of
the valve and secure it on the valve side with
one nut (M16)
3.
congruently
4. Screw the nut (M16) on the threaded bolt from
below
5. Screw in the 3 screws M16x60 and
tighten the 4 screw connections equally cross-
wise.
6. Put the flange seal DN 100 on the connection
flange of the shut-off valve.
7. Put on the adapter flange. While doing so, ar-
range the holes/threaded holes congruently.
8. Create screw connections with 4 screws M16x90
and
4 nuts M 16 between the shut-off valve and
adapter flange and equally tighten crosswise.
en English
-