SCHOLTES HP 96 IX Mode D'emploi page 12

3) Ducting version:
a) Connect the air vent of the hood to the air vent
hole using a flexible hose of 15 cm diameter.
Lock the flexible hose with hose clamps (hose
and clamps not provided).
b) Make the electrical connection of the hood by
means of the power cable (refer to the paragraph
"Electrical connection").
c) Fit the decorative flue resting it on the hood. Lift
the upper flue up to the ceiling and secure it by
means of the 2 screws (L).
4) Filtering version:
a) Fit the baffle (M) to the upper flue using 4 flat-
headed screws (N). Connect a flexible hose of
12.5 cm diameter to the baffle locking it with a
hose clamp (hose and clamp not provided).
b) Connect the flexible pipe to the flange on the air
vent.
c) Make the electrical connection of the hood by
means of the power cable (refer to the
paragraph "Electrical connection").
d) Take the decorative flue and rest it on the
hood. Lift the upper flue up to the ceiling
and secure it using the 2 screws (L).
e) Check if the charcoal filter (P) has been
installed. If not yet installed, proceed by sliding
the 2 filter clips into their seats and turn the
filter upwards.
GB
11