Publicité
Les langues disponibles
Les langues disponibles
INTERFACE USB
Conversion signal : Analogique
Digital ou Digital
Lecture : Distortion : < 0.05%
Ratio Bruit : 80dB
Enregistrement : Distortion : < 0.1%
Interface : USB1.1 ou USB2.0, fonction lecture et enregistrement
DIMENSIONS (L x l x h) : 482mm x 221.5mm x 105mm
POIDS : 3,5 kg
Attention: L'appareil ne doit jamais être en contact avec de l'eau ou tout autre liquide.
FRONT PANEL
1. POWER Switch
This switches the AC power to the mixer ON or OFF.
Note: Be sure to switch on the power to your mixer before switching on the
amplification system.
2. DJ MICrophone Input
A Combination XLR & 1/4" jack sockets mounted on the front face of the mixer for
connecting your microphone and offer both balanced or unbalanced microphone
connections.
3. GAIN Controls
Correct setting of the controls for input GAIN for every channel is crucial for getting a
good, strong signal without noise or distortion.
Analogique : 16 bit
54IN816.011409
5
4. MIC & Music Channel EQ
All Microphone channels & music channel have a 2-band equalizer for tone shaping.
The EQ controls have fixed frequencies and a boost/cut range of +/- 12dB.
5. Input Selector
Each music input channels has two input options. This switch lets you select which of
the inputs plugged into the channel you wish to use. All input channels are dual with
Channel MIC/LINE and Channels PHONO/LINE.
6. CUE Switch with Indicator
These switches determine which source is heard in the headphones, the LED
illuminates when the CUE switch is on.
7. Channel Level Control
The channel fader adjusts the overall volume of the channel. The faders of the stereo
channels control both left and right signal at same time.
8. TALK ASSIGN
This switch determined which microphone is activate all other inputs will be
automatically attenuated.
9. TALKOVER Control
When the assign microphone is activated all other inputs will be automatically
attenuated. This control pre-sets the level of which the main music program will be
attenuated.
Attenuation range: 0dB (OFF) to 20dB.
To disable the override facility, simply turn the control fully clockwise.
10. Replaceable Crossfader
The Crossfader allows the mixing of one source into another. The left side of the
Crossfader is channel 1 and the right side is channel 2. The Crossfader in your unit is
removable and if the need arises can be easily replaced.
11. MASTER Level
This slider controls the overall output level leaving the Master balanced XLR and
unbalanced 1/4" phone jack outputs.
12. BOOTH Level
This slider controls the overall output level leaving the Booth unbalanced RCA jack
outputs.
13. Headphone PAN Control
Varies the mix between the cued input and main L, R output, and ideal for accurate
beat mixing. Full left will give cued input; full right will give main output program.
14. Headphone LEVEL Control
This control varies the volume in your headphones, the volume of the signal heard
through the headphones.
15. PHONES
This is a 1/4" stereo jack socket mounted on the front face of the mixer for you to
attach your headphones.
16. Output Program Level Display
The display shows the signal level of the mixer master.
6
Publicité
