LG PRARH0 Manuel D'installation page 15

Wireless Remote Controller - PQWRCDF0
Installer Setting Code Table
Function Function Code
Auxiliary heater
NOTE
The indoor unit displays during the heating mode, the Aux heater is automatically turned on, but it is not
displayed on the wireless remote controller
2 By using the TEMPERATURE SETTING button, set function code
and setting value. (Please refer the Installer Setting Code Table.)
3 Press the ON/OFF button toward the indoor unit 1 time.
4 Reset the remote controller to use the general operation mode.
Setting Value
Set to Auxiliary Heater Relay Kit
2
Cancle Auxiliary Heater Relay Kit
Check Auxiliary Heater Relay Kit Installation
.
5. Installer Setting
Function Code
Setting Code
Remote Controller LCD
Installation Manual 15