Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
CONTENTS OF THE PACKAGING insert_p 1
•
1 mirror ×5
•
1 adhesive suction pad
•
1 USB charger cable
•
1 instruction handbook
PRECAUTIONARY MEASURES
report_p Please read all the instructions
before using your product, particularly
these few basic safety instructions.
camera_a The photographs and other images
of the product in these instructions
and on the packaging are as accurate
as possible but do not claim to be a
perfect reproduction of the product.
Always power up the device with the USB cable supplied
by connecting either to a computer or the mains using
a commercial USB adapter, the output current of which
is at least 500 mA.
report_p Warning
Do not connect or disconnect the USB cable with wet hands.
If the USB cable is damaged, it must be replaced by a
similar cable available from the supplier or the supplier's
after-sales department.
report_p Please note
This device is not intended for use by people, including
children, with reduced physical, sensory or mental capa-
bilities, or people with a lack of experience or knowledge,
unless someone responsible for their safety can supervise
or instruct them beforehand on how to use the device.
Children should be supervised to make sure they do not
play with the device.
Make sure that children and minors do not play with or
use the device.
LANAFORM cannot be held liable in the event of acci-
dental damage resulting from any use contrary to the
instructions given in these instructions for use.
Always follow these instructions when using this appliance.
Do not use accessories that are not recommended by
LANAFORM or that are not supplied with this equipment.
Never let anything drop, and never insert any object,
into any openings.
Never use this appliance in a room in which oxygen is
administered.
Do not place the mirror in a position in which it might
reflect the sun as this could start a fire.
Do not dismantle the device entirely.
Before cleaning the device, make sure that the USB cable
is fully disconnected.
Do not wash the entire unit with water and do not immerse
it in water. Consult the cleaning instructions in this manual.
Do not store the product for long periods in a hot or
humid environment.
To make sure the suction pad adheres well, you are advised
to reposition the product every 3 months.
The device may only be used on a tiled or glass surface.
PRESENTATION
Thank you for choosing the LANAFORM 2-in-1 mirror. The
2-in-1 Mirror ×5 with an LED luminous halo provides you
with the greatest accuracy for putting on your make-up.
DESCRIPTION OF THE DEVICE insert_p 1
1 High-definition mirror ×5
2 LED luminous halo
3
touch button
/
on
off
4 Angle adapter ball
5 Mirror rotation points
6 Removal point
7 Adhesive suction pad
8 USB micro charger loading port
9 USB charger cable
10 Charge indicator
11 Water outlet
AREA OF USE
Always place the device on a hard, flat, horizontal surface
inside. Keep it away from walls and heat sources such as
stoves, radiators, etc.
PREPARATION PRIOR TO USE
Do not forget to charge your 2-in-1 mirror fully before
you use it for the first time.
This device can be recharged in two different ways: by
connecting the USB cable to a computer or to a USB
adapter (5V), not supplied.
To recharge your device fully, leave it connected to
the power supply for 3 hours. The mirror will be fully
charged when the red light at the back of the device
is extinguished.
To make sure the device is completely safe to use, you are
advised to reposition the mirror every 3 months.
EN
FR NL DE ES IT PL CS SK SL HR BG AR
INSTRUCTIONS FOR USE
1 Depending on your requirements, you can either
stand the mirror on its feet on a table, or fix it to a
wall or another mirror, following the steps below.
2 Put the suction pad on the wall, by ap-
plying gentle pressure.
[ insert_p 1 label 1]
3 Turn the suction pad clockwise until it
comes to a complete stop.
[ insert_p 1 label 2]
report_p If the suction pad is not properly fixed
from the outset, the mirror may fall off.
report_p LANAFORM cannot be held responsible
for any damage or breakages that the
mirror might cause if not properly fixed.
4 Put the mirror on the suction pad's magnet.
5 Press the
button to switch
/
on
off
on the device.
[ insert_p 1 label 4]
6 To control the intensity of the lumi-
nous halo, press the
touch but-
/
on
off
ton and keep pressing it.
[ insert_p 1 label 5]
7 To switch off the mirror, press the
to switch off the luminous halo.
[ insert_p 1 label 5]
8 If water has infiltrated the LED compart-
ment, open the removal point and re-
move the stagnant water.
[ insert_p 1 label 6]
MAINTENANCE
Switch off the luminous halo using the
Unplug the mirror from the magnet before cleaning it.
Clean the mirror face using a glass-cleaning product and
a soft, damp cloth.
Do not immerse the mirror in water.
Never use a different liquid or abrasive cleaner.
STORAGE
Having cleaned and dried the device, store it in a dry, cool
place out of the reach of children.
healing DIAGNOSIS
If any breakdown persists, do not try to repair or open the
device yourself, but return it to the supplier.
TECHNICAL DATA
Name and model : 2-in-1 Mirror LA131010
Charging voltage : 5.0V/500 mA
Voltage rating : 3.7V/2.0W battery
Type of battery : Li-polymer 3.7V 750mAh
Water-resistant : IPX4
Product dimensions : 17 x 17 x 7.5cm
[ insert_p 1 label 3]
button
/
on
off
touch button.
/
on
off
3
/ 20
Publicité
