Peaq Dect-Phone PDP 270 Mode D'emploi page 40

ENGLISH
Settings
LANGUAGE
Language
English
Deutsch
Français
Español
Nederlands
Italiano
Choose a language with the navigation buttons
and press to confirm.
REGISTRATION
Registration
Register
De-register
Select Base
HANDSET REGISTER/DE-REGISTER
For details information refer to REGISTER THE
HANDSET/ DEREGISTER THE HANDSET
in chapter "First steps". You can choose one
Base station if there are several available.
TIME SETTING
Date and Time
Date and Time
Set Time Format
Auto Update
40
IM_PDP270_150518_V03_HR.indb 40
DATE AND TIME
For details information refer to SET DATE AND
TIME in chapter "First steps".
SET TIME FORMAT
For details information refer to SET DATE AND
TIME in chapter "First steps".
AUTO UPDATE
Switch on/off the automatically time updates.
PIN
To change the default PIN-codes or enter a
new code, follow the steps:
1. Enter the 4-digit default PIN (0000) and
confirm with the right display button.
2. Enter a new 4-digit PIN and confirm with
the right display button.
3. Repeat the new 4-digit PIN to confirm.
4. A beep sound will indicated the complete
setting.
DISPLAY
Contrast
Possible contrast settings are:
• Low
• Middle
• High
Backlight Time
Possible backlight time settings are: 10s, 20s,
30s or 40s
Name of Handset
To change the default handset name, proceed
as follow:
1. Press the left display button.
2. Enter a new name with the numeric
buttons. Toggle between upper and lower
case with the star button.
18/5/15 11:36 AM