Description Of Control Panel; Switching On; Adjusting The Power Level; Additional Cooking Zone - Brandt TV623BT1 Guide D'installation Et D'utilisation

99640081_A_FR.qxp 18/09/2006
2 2 / / USING YOUR APPLIANCE
• •
DESCRIPTION OF
CONTROL PANEL
touch controls.
Start/stop
A
Power - +
B
Timer- +
C
Locking
D
• • POWERING ON
Press the start/stop button for the cooking
zone you want to use. A flashing 0 and a bip
indicate that the cooking zone is on. You can
then choose the desired power level.
If you do not select a power level, the cooking
zone will automatically turn itself off.
• •

ADJUSTING THE POWER LEVEL

- Press keys - + of the cooking zone you wish
to use to adjust the power level. Do the same
operation for the other cooking zones.
• •
STOP
Press on the start/stop button of the zone
being used or on the "-" power button until the
display disappears.
• •
ADDITIONAL ZONE
Depending on the model
The additional cooking zone can be used only
when the main heating zone is in operation.
To switch it on:
When switching on:
- Setting the power level.
- Press the touch control
confirm your action, alternatively the power
setting and an "E E " will be displayed, adjust the
power if necessary.
To switch it off:
- Press the touch control
confirm your action.
11:07 Page 23
ADJUSTING THE TIMER
C
D
B
There is a timer for each cooking zone.
A Use the
on which you would like to use the timer.
If you press this button several times, a rotat-
ing symbol will show which cooking zone the
timer is being used for.
The rotating symbol and timer can only be
modified for a zone if it is turned on.
To use the timer:
- turn on the cooking zone
- select the rotating symbol for this cooking
zone.
The timer only operates if there is something
on the cooking zone.
- adjust the timing by pressing "
timer (or "- - " adjusting from 99,98,97,...min).
When you have finished cooking, the cooking
zone turns itself off, the timer shows 0 0 and a
b b i i p p sounds. Press any button to stop the bip.
- To change the timer settings, press the - or +
buttons on the timer.
- To stop the timer, press the
- To use the timer on a different cooking zone,
choose a new use by pressing the
several times.
When the previous timing stops, set your tim-
ing for the new cooking zone using the "+" or
, a beep will
"-" buttons.
, a beep will
23
EN
button to select the cooking zone
+
" on the
button.
button